2004 Chevrolet Silverado 1500 Crew Cab "balancer torque" Questions

KNOCK SENSOR KEEP GOING OUT CHECK ENGINE LIGHT COMING ON TESTED IT IT READS KNOCK SENSORS WHAT CAUSES THEM TO GO OUT I HAVE REPLACED KNOCK SENSORS INTAKE GASKET AND THE WIRING HARNESS TO THE KNOCK ...

why does my 2005 chevy silverado shake at 50mph? It has 60k miles. It is in great shape. When i'm driving around 50mph on a very slight incline so the engine is under very little load, the truck ...

torque is 70 lb. ft. Before reinstalling the balancer check the key way for wear both on the balancer and the crankshaft. Also when reinstalling the balancer on the crankshaft it should be a press fit

...harmonic balancer as well as the 4 pulley bolts. Thankyou Here is a post with the torque specs. ...

balancer bolt. Torque bolt to + 56 degrees (104 lb. ft. + 56 degrees). Install inner fender shield. Install tire and wheel assembly. Torque lug nuts to (104 lb. ft.). Lower vehicle. Install serpentine

...should have a torque of 85 foot-pounds. Hemi426, smaller Chrysler and larger Chrysler motors should have a harmonic damper bolt set to 135 food-pounds. Harmonic Balancer Torque Specs - It Still ...

balancer bolt.Torque the crankshaft bolt to 140 Nm + 56°(104 lb.ft + 56°). Foreign object deflector. Electrical connector. Inner fender shield. Tire and wheel assembly, torque to 140 Nm (104

I have a 1991 chevy G20 . There is a vibration coming from the torque converter remove the cover and check for failing flex plate or missing mounting bolts for the torque converter as the torque ...

Just had torque converter replaced. When i picked up my f150, 2004 truck, i noticed a bad vibration. Had plugs changed, still vibration. Called transmission man back and he said the converter may be ...

...torque converter and the harmonic balancer...My mustang is doing the same thing and i'm almost positive that its the harmonic balancer...but were gonna get under the car take off the torque converter ...