2003 Chevrolet Suburban 2500 "break job" Questions

...during the break job. If you did bleed the lines during the job you may be low on break fluid. If the fluid level is OK then you should bleed the breaks again, making sure the fluid level stays

...started leaking. I closed it back up n after job was done n was pressing break pedal break fluid started pouring out. How do I fix it. you have to replace caliper and bleed line for air,after

...to avoid breaking the studs off at all costs. If you break them, who-ever ends up fixing them will still charge you for the complete job plus extra for breaking the bolts which makes the job

...apart the dashboard without breaking anyting so my wife will love me Plastic trim removal tools are required for this job or you will break something. Recommend you refer this job to a Hyundai

breaks are haveing noise' put breaks on and pades and turned the rootter and get a thumping in the break pettle did u put a hardware kit with new shims on when u did the brake job.

...after bleeding breaks, changing pads, entire break job, light wont clear out, also disconnected battery, no go either the leval float sensor in the resorior is stuck, disconected or you r low on ...

break making sounds click click click as I apply the breaks obviously as I slow down so does the clicking sound Hi Aaron, I believe you'll find that a brake shoe retainer or one of the springs has

...break job anyway and the parts store happily sold me a "HARDWARE KIT" that had all brand new springs and locks. Doing the whole break job myself was about 50 dollars if I rememeber but any break shop ...

...are not a good design alot of people have this problem. the door panel has a small ear on it that breaks and it is hooked directly to the window control switch. you can either glue it back or order ...

...break a part from your dash that is a structure idem. Don't do that. But watch them all before you tackle it. It will take about 5 to 6 hours to do the job. Longer if your like me, I had to go back ...