2003 Chevrolet Silverado 2500HD "replace rear axl bushes" Questions

Ad

Question about Chevrolet Silverado 2500HD

1 Answer

...replace the opposite rear suspension lower arm . WARNING: TURN REAR SUSPENSION LEVELER COMPRESSOR SWITCH OFF (IF SO EQUIPPED). NOTE: If both rear suspension arm and bushings and both rear suspension ...

Ad

Question about Nissan Cars & Trucks

2 Answers

...replace if needed. The 4 main radius rods that locate the rear axle have large rubber bushes at the connections to the axle and the chassis which wear out over time. Take the rods off the vehicle and ...

Ad

Question about Chevrolet Silverado 2500HD

2 Answers

...rear left axle bushing need to be replace is it normal my car got 90 000 km on and its a 2005 My 2004 had the same problem at 102,000 kms, warranty was up at 100,000 kms. GM would not do a thing and ...

Question about Chevrolet Silverado 2500HD

1 Answer

tyre wear excess tyre wear from rear inner side rr axle after replacement of rear axle ok have you checked that the tyre pressure is the same on all four wheels or it could be that the rear axel is ...

Question about Chevrolet Silverado 2500HD

2 Answers

...rear but said it needed sway bar links had those replaced. My husband said the right trailing arm bushing seems wore out but can't find anyone who knows anything about this. If this is the problem, ...

Question about Chevrolet Silverado 2500HD

1 Answer

...look good, you can remove one of them and check if is hard to constracts ,if not they must be

Question about Chevrolet Silverado 2500HD

1 Answer

...replace rear control arm bushings,rear to axle and front to frame on 2005 jeep liberty,3.7 litre. and are they expensive. Generally the bushings aren't too expensive (likely about 25-30 each...But, ...

rear end pulls right when accerating at highway speed 60-70mph Have you had a four wheel alignment done recently? Do you replace all the links in their entirety, or just the bushes? If just the bushes

Question about Chevrolet Silverado 2500HD

1 Answer

...and it is making a grinding noise when I back up I was told it was the carrier bearing but I just replaced it three months ago and I checked it and it seems fine what else could it be It may not be ...

rear hub bearing. Tires spun balanced and rotated.130,000 miles check the front suspension bushes lower contol arm and radius bushes use a big screw driver to lever the bushes around to check for play

Not finding what you are looking for?
Cars & Trucks Logo

1,273 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...