2003 Chevrolet Silverado 1500 "vacuum line" Questions

Ad

vacuum line hose that opens and closes the valve. Remove the vacuum line hose, start the engine with the temperature set to cold and see if there is any vacuum on the line. Then set the temperature to

Ad

Question about Chevrolet Silverado 1500

1 Answer

...vacuum line that is located on the passengers side of the engine and operates the vacuum functions for the internal a/c heat controls. The vacuum is drawn from the intake manifold. There maybe more ...

Ad

Question about Chevrolet Silverado 1500

4 Answers

...vacuum line I have a broken vacuum line at a valve behind the abs. there is a smaller line that goes to a plastic line in the wiring harness i can not find where the the broken one goes. Need vacuum ...

...vacuum line on fuel pressure regulator 1999 Silverado. Seem to be having fuel leaking into the vacuum line on the fuel pressure regulator. When you shut the truck off and pull the vacuum line off, it ...

Question about Chevrolet Silverado 1500

1 Answer

vacuum line with the engine running. If the engine rpms increases, you have found the leak. If you find nothing amiss, take it to a professional and do not just throw parts at the problem. You will be

Question about Chevrolet Silverado 1500

2 Answers

...replace fuel filter.and check vacuum line going to fuel pressure regulator.make sure vacuum is going to vacuum line.if changing fuel filter dont help. fuel pump could be faulty. change the crank ...

...vacuum line? I want to do the sea foam on my 2003 silverado 1500hd but I can't find the vacuum line? You don't need that or any product for use on any vehicleIf you have problems provide ...

Question about Chevrolet Silverado 1500

1 Answer

air condition only blowing through defrost You most likely have a vacuum leak. The dampers are controlled by engine vacuum. Check the vacuum lines on the engine, vacuum resevoir etc. Engine should run

Question about Chevrolet Silverado 1500

1 Answer

...vacuum line can cause a problem. What I have done in the past is cut just the tip of each rubber vacuum line(that is if there is enough) to reassure the line has a tight fit on the fitting. I don't ...

Question about Chevrolet Silverado 1500

1 Answer

...Check all the vacuum lines from the vacuum source all the way to the end of each line. These lines are bad about coming loose, or rotting out. Let me know what you find. And have a Merry

Not finding what you are looking for?
Cars & Trucks Logo

2,477 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...