2003 Chevrolet Silverado 1500 "tightening pulley belt tensioner chevy" Questions

...pulley did not fix it. A/c quit yesterday any ideas... Compresor? sounds like belt is loose and when load is put on it it just slips and wont engage the compressor and it will squeak. try tightening ...

...belt for slack looseness or glazing, the cold weather tends to make all kinds of issues with belts so re checking the tension is a good idea.. also with most newer vehicles the tensioner pulley may ...

...tension pulley bolt 2002 Chevy Impala with belt on Get a socket or a ring spanner on the bolt and tighten it up. ...

pulley(back side of the belt,no grooves)Think it's a 15mm bolt, just "tighten the bolt" and the spring loaded tensioner will move The pulley is steel on the 4 cyl, plastic on the V-6 The tensioner

...7.4L V8 with ac? Technically, you don't. The tensioner pulley keeps the belt tight. If you took the belt off and put it back on, and now it is not tight, it may be on one of the pulleys

...belt tensioner pulley. 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment. 4 Route the new belt across the ...

...too small) go the next size up on belt because if it's from AutoZone there belt listing is wrong.....check your idler pulley- belt adjuster too if the outside is shiny..chances are it could be no ...

...belt off the pulleys and remove it from the vehicle. ?4 Remove the water pump pulley. Place a screwdriver behind the pulley to lock it in place while removing the pulley mounting bolts with a ratchet ...

...tensioner that tightens the belt to the point that you can get it off the alternator.Once the belt is off the pulleys then you need to get it over the rad fan blade by feed it over them one at a time ...

...belt on the one of the pulley. Unless you are Arnold, you will need help. b) Pull a rope behind the tension pulley arm and pull while pushing with your left arm on the pulley arm to compress the ...