...size tool i need to take caliper bolts off on the front of a 2002 chevrolet 1500 4x4?? Sometimes they use a T-50 torx bit, and sometimes they use either a 15mm or 18mm bolt, however the caliper ...
Question about Chevrolet Silverado 1500
...size needed to remove the brake caliper? need a torx 55. must remove caliper in the bracket then remove the caliper. Bracket bolts are 17mm I think. Yes, it is a hex key. Ask your autoparts store ...
size allen wrench to take off front disc brakes on 2000 chevy silverado 4.8 l The caliper guide pins will usually have either a 3/8 inch or a 5/16 inch allen head bolt. If the brake calipers are found
...bolt. Using a brake caliper retraction tool, select the appropriate sized piston press arbor and install the tool onto the brake caliper. Following the tool manufacturer's recommendations, use the ...
...SIZE C-CLAMP TO PUSH IN THE CYLINDER ON THE CALIPER , AND HIGH TEMP BRAKE GREASE TO PUT ON CALIPER BOLTS WHEN RETIGHTENING. HOPE THIS HELPS CRAIG. HERES A LINK TO LOOK AT I FOUND TOO!! ...
...size caliper bolt in a 2009 Hyundai Elantra? I am replacing the rotors. What size and type of wrench do I need? 12 mm ,14,mm wrench or socket that to remove the caliper 17 mm wrench or socket for the ...
...size wrench for those two bolts (possibly 10 mm), remove them, and the caliper is free except for the brake hose leading to it. If removing completely from the car, remove the brake line at the ...
Question about Chevrolet Silverado 1500
2004 Santa Fe 2.7L cdx REAR CALIPER SLIDING BOLT SIZE rear brake caliper sliding bolt size measures 8mm x 29mm with 14 mm head with flange marked 10 Is there a question there
Question about Chevrolet Silverado 1500
...to big. I tried all standards too. Could you please tell me what size the front caliper bolts are supposed to be. Its a 2006 Escape 3.0 4X4. I would appreciate your help. Please try a TRX --E10 ...
size of the bolts that hold on the brake caliper housing and the bolts that hold on the brake caliper I believe the brake caliper bolts at the slides are 13MM hex and the bracket bolts are either 18MM
2,477 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions