Knock sensor bank 2 sensor were is located? I can't find it, please help me locate the knock sensor ? V6 or V8? On 4.8, 5.3 and 6.0 it is under the intake. You have to remove the intake manifold. ...
...knock sensor low input bank 1. I had both knock sensors replaces along with pcm. After just a few miles on the road service light went on again and reading same codes. what could cause this problem? ...
Knock sensor location Where are bank 1 and bank 2 knock sensors? Is bank 1 in front? bank one is the driver side 2 is on passenger side
knock sensor plug on a 4.3 vortec the knock sensor is back beside the base of the distributor. The knock sensors in 4.3-liter V6-powered light pickups, such as the C1500 and Silverado, are in slightly
...1 sensor 1 and 2 and also codes Po151 and 187 oxygen sensor Bank 2 sensor 1 and 2. Could this all be caused by a bad fuel filter? Any other ideas? Thanks Not the fuel filter More like a vacuum ...
Question about Chevrolet Silverado 1500
Knock sensor (Bank 1) There is a way to test the resistance, but I dont know the specific Ohms for your vehicle. P0400 EGR Flow This means that there is a buildup of carbon and other things in all the
...knock), and/or a hesitation/surge on acceleration. Causes: A code P0171 may mean that one or more of the following has happened: * The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of ...
...knock), and/or a hesitation/surge on acceleration. Causes: A code P0171 may mean that one or more of the following has happened: * The MAF (Mass Air Flow) Sensor is dirty or faulty. Note: The use of ...
KNOCK SENSOR CIRCUIT MALFUNCTION. CODE PO 174 FUEL TRIM SYSTEM LEAN BANK 2 CONDITIONS. CODE PO171 FUEL SYSTEM LEAN BANK 1 CONDITIONS. CODE PO131 HO2S 11 BANK 1 SENSOR CIRCUIT LOW INPUT CONDITIONS.CODE
2,477 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions
