2002 Chevrolet Cavalier Coupe "hood 10 opened release" Questions

10 mins, if that is OK then check the plug. On driver's side, just beside the hood release, pull the kick panel carpet away. You will see a green plug, press on centre to open it. Find the PURPLE wire

10 inch extension Cardboard Box or Carpet Mat. Fast Orange Soap ... 2. Open the hood. Vehicles around this model year usually have a hood release lever under the steering column to initiate this step.

Hood release on 95 S-10 inoperable Appears cable is stretched not broken. Tried to pull cable inside vehicle with vice grips. Hood will not open. Have one person pull the hood release inside cab while

...10 TO 20 DEGREE DAYS RECENTLY. TRIED TO OPEN HOOD VIA INSIDE RELEASE. NOPE, NOTHING. THIS IS A "SE" VERSION. ANYONE KNOW IF THESE RELEASES ARE ELECTRONIC ?? OR DO WE HAVE A STRETCHED CABLE ?? ...

...10 blazer broken hood cable The hood cable broke on my 98 s-10 blazer and i can't get the hood up to change it.Any info would be much app. i believe you can remove the grille without opening the hood ...

hood release stuck on '90 S10 8 below zero, battery is dead and hood won't release, anyone know how to open the hood on a 1990 S10 when hood release stuck? you will have to reach up behind bumper and ...

the black plastic mud guard from under the bumper, use a 10 or 12 mm socket with extention to reach the hood latch from under the car, un bolt the latch and lift the hood up to repair. Hope this helps

hood release cable is frozen, how to unlatch hood? hood release cable is frozen, how to unlatch the hood without it? if you can get a pry bar or a screwdiver under the hood and push on the mechanism ...

...10 pickup. The cable is no longer connected to the hood release lever. A 'friend' pulled the cable out. How do I replace the cable and how do I open the hood? I have this same problem. You have to ...

...hood open to check oil or anything else. Is there some way to get it open? In the windshield wiper area on both sides of the car you will see a rubber plug about 1 inch in diameter. Use a flatblade ...