2001 Chevrolet Silverado 2500HD "turn signal relay" Questions

...signal turn switch in my 2004 chev 2500HD and still no signal lights. Is there another relay i am not aware of? Not a relay, but a fuse for turn signals in your fusebox. Did you check that? Had this ...

...still no turn signals,any help or positive advice would greatly be appreciated. The stalk for the turn signal need inspecting for damage .The stalk gets more use than any other part in the ...

...signal to close relay, if i give signal it will close and crank. We had starting problem 2 times before this issue but starter was engaging and turning slow load test both batteries they were weak we ...

turn signals stoped working,changed switch& relay, not it Change bulbs? Your first check should have been the bulbs. Check them with an ohm meter to make sure. Also check for moisture inside the ...

signal from several sensors (mainly the Crank Sensor) it will not turn on the pump. You may want to check these sensors, is the check engine light on? You can scan it to see if any sensors have thrown

...turn signals will not work, fuses, bulbs and the relay are good. This happend after I pluged a boat trailer pig tail in, all the other lights work on the truck and trailer. you may have damaged the ...

...Turn signal in right mirror does work as well as the one in the left. Both 25 Amp circuit breakers for doors are OK. This came on suddenly. One day it was working and the next not. you have a relay ...

turn lights work but the hazard lights don't work. I can not fimd the flasher relay. anybody know where it is? The Signal Flasher is on the back side of the Fuse Panel. To access it, remove the driver

...turn the key nothing happens. The signal wire to the starter is not getting power. Pretty sure I have continuity from the relay to the signal wire. Not sure where to go next. Make it easy on yourself ...

I hav no brake lights . Put in new brake relay sesor, changed out brake lights , I still have turning signals, but still no brake lights You probably have a broken wire or bad ground. If you have an ...