2001 Chevrolet Silverado 2500HD "hot heater blower resistor" Questions

heater and fan motor and the ignition switch are turn on so you can here if the motor comes on. A lot of times these blower motor resistors get hot enough to melt the connector causing it to loose its

Heater blower resistor gets very hot Part 2. Found a blown fuse that prevented my heat/ac from working (Thanks, Walker!), but the Heater Blower resistor's ceramic element is VERY hot. Not familiar ...

...hot, so they are placed onto the heater case where air inside the case will blow by the resistor pack and help cool it. The resistor pack is the last part of the wiring to the blower motor. You have ...

...wire should be hot with the switch on LOW.If any of these are not as stated above, then you either have a bad A/C - heater control unit, or faulty wiring between the control unit and the

...the resistor. It will burn out. Air flow in the heater box cools the resistor. These resistors get very hot when the blower is running. The A/C 's heater works but the A/C doesn't gives cold ...

...heater blower only works on full power Air con, hot, cold all working. I've checked the resistor and looks perfect. Have bought another heater blower unit and changed the existing one and the ...

...heater resistor is located on a 2010 Alto NO BLOWER RESISTOR WORKS HOT OR ON A/C. IT IS JUST IN FRONT OR PART OF BLOWER BASE OUTPUT, THIS IS BECAUSE, THE RESISTOR RUNS SUPER HOT AND IS BLOWER ...

...hot and it is usually the practice to bury the resistor in the cool air intake of the heater unit to help prevent them overheating. Because it isn't unusual for heater motors to seize which ...

...heater blower motor has two hot wires running down two front blower motor when and ignion is on changed fan switch,motor,looked at resistor, did continuity test 0n resistor it was ok what can i do. ...

...heater control do not work would it be the resistor or the blower motor 01 datoka it's the resistor replace the blower then replace the resister the blower is draging and the resistor gets hot and ...