94 chevy 5.7 350 need to reset timing what do i need to do? start engine and bring to normal operating temp. unplug the base timing connector located in the distributor wiring harness tan wire with a ...
did an engine swap 88to92 5.7litrer got most of the kinks out but one that gots me stumped it slowly retards timing untill poping ocurrs.... any takers?? YOUR IGNITION TIMING WOULD BE 4 DEGREE BEFORE ...
...and above. The noise is like a rubbing grinding noise and like I said it doesn't happen all the time. When I settle down at a constant speed the noise greatly diminishes AND from time to time
350 wont run just backfires after setting the timing and hookingup the wire for the timing. check the rotor arm in the distributor
can i use a conventional timing light to set the timing on my 95 chevy pickup 5.7L throttle body ? yes
distributor problems?? I installed an accel distributor in my truck, found it was not compatible with computer for fuel injection. So, I went back to stock. I installed it found TDC aligned timing ...
...original, truck ran great three days, acted like starter failed again, replaced starter a second time, cranked and ran three or four times, now acting like starter for a third time.... checked ...
airbag warning lite blinks 6 times when starting then comes on but goes off intermittently while driving returning on at no particular interval. This just started today. In a 20 mile trip went on and ...
I have no manual for my 1994 Chevolet Silverado - How do I set the time on the clock? Turn radio off, push SET, then use the,seek, scan buttons to set time, when its set, push SET again.
Hissing around gas tank heard after turned off. Truck has to be turned over three times before it starts. The one time it would not restart the hissing was much louder. Possibly fuel pump beginning to
63 questions posted
Usually answered in minutes!
214 Questions
154 Questions
139 Questions
124 Questions
98 Questions