2000 Chevrolet Silverado 1500 "rear brake pads hot smoking" Questions

...brake-lines issue. Can't figure out how to get the pressure to release on the rear pistons. It sounds like the rear calipers are bad. Raise the rear wheels and see if you can turn the tires. If you ...

brake lock up After replacing the rear pads, the brakes are "smoking". They got real hot only going a couple of miles. If you replaced the shoes (this would indicate you have rear drum brakes) you ...

...rear brake pads and rotors on truck. Now truck will stop on its without touching the brake pedal and if you drive a mile they are smoking and red hot. Burning smell. Any suggestions???? Yes sounds ...

...rear brakes. Be sure the park brake is totally off. There is also a possibility that bearing grease has gotten into one of the brake drums or on the pads causing a lack of braking and a lot of

...rear passanger wheel I just replaced the brakes, the caliper and the rotor on my dodge stratus 2002. and went on a test run and now the rim is hot and the smoking a little. All new parts. I was told ...

...rear wheels smoking. Changed center brake hose, seemed to fx issue until my wife drove it to school to pick up kids. Both back wheels smoking. Is this an ABS Control Module? There are a number of ...

...rear drum brake. What could be the problem? did u turn drums? if so did u have to force drums back on? if u did that was a no no something is not right inside that u over looked,,if the drums where ...

...rear brake pads and now there is a burnt rubber smell. Brakes getting really hot and smoking it is really common for the rear caliper slides to become stiff or frozen. The caliper should slide back ...

rear brakes pads. while driving one of my rear wheels get so hot that there is a smoke coming out any body has a clue why? Just a guess, but maybe something is not put together right in that wheel? If

...it ,depends on rear brake layout ,now is this vehicle using a shoes indie the rear disk or is the handbrake cable running to the caliper?' if so release the cable as i think its been ...