2000 Chevrolet Silverado 1500 "4l60e 1st" Questions

4l60e chevy 4x4 1st good 2nd good nio more shifts fluid full and not burnt It is possible you have a broken sun shell. This is a common problem in this transmission.

4l60e repaired. now the trans starts out in 3rd gear. if you give it gas it downshifts into 1st and 2nd. then when you get to 40 mph it tries to it switches back and forth between 2nd and 3rd . when i

...1st and 3rd forward gears? I have a 98 Z-71 and have been through 3 of them. The OEM shell is junk. When you take it to the tranmission shop, tell them to replace it with a hardened shell. My local ...

...1st or 2nd, 225psi is optimum. If base pressure is low, trans or pump is worn out. If max pressure is low, check EPC solenoid. If reverse is slow to engage, and line pressure does not come up to at ...

4L60E is run by your ecm, the 700R4 while looking close to the same does not relie on your ecm for commands,it relies on a cable to regulate your line pressure. i have a 99 suburban and it is slipping

...is not burnt when I take off in od it shifts ino 1st 2nd then acts like it shifts into neutral and i have 4l60e automatic transmission there is actuators for each gear i would look into testing ...

I have a 94 gmc suburban with a 4l60e and have nothing but 1st and reverse gears it will let go of 1st but nothing where 2nd should be. You need a transmission rebuild my friend.

...4l60e trans in nh. its coming out of a chevy astro van. will this trans fit in my 94 2wd ext cab? the trans in it now won't engage reverse it is stationary not moving or reving up past 3 to 4000 ...

...4L60e gets 1st and 2nd then 3rd neutrals out if I am not stomping on the gas or going up hill. Other than that it neutrals out at around 35mph everytime. Does this necessarily mean I need a rebuild ? ...

...4l60e that was all the wires been strip off of it.. It is stuck in limp mode [I guess] all I need is 1st to move it around the farm.. Is there anyway I can wire it so it will just need 1st gear to ...