1999 Chevrolet Suburban "replace blend door" Questions

Ad

Question about Chevrolet Suburban

1 Answer

Replace Blend door on 2004 Suburban Hot air out of driver side; cold on pass; where is blend door My problem is hot air on the drivers side, cold on Pass when the AC is on...2004 Sub

Ad

Question about Chevrolet Suburban

2 Answers

...replace it. Mine would only move with the blower in the off position. Short of your blend door there is always the switch under the hood which reverses the flow from straight to crossed across a 4 ...

Ad

...blend door actuator located on my 2009 Chevy Suburban? On my 2009 Chevy Suburban LT, the A/C will only blow hot on the drivers side. I know the left blend door actuator needs to be replaced but don't ...

Question about Chevrolet Suburban

1 Answer

blend door problem. If your switching to cool air and it is still hot then you also have a heat exchange unit fault, this is the component that changes the water flow from hot to cool by shutting off.

...blend door actuator switch over in my 2002 suburban despite being replaced already? Front air is stuck on hot. Rear air works fine. I have replaced the actuator itself. Mechanic could hook up a ...

Question about Chevrolet Suburban

3 Answers

...if the blend door will reset.If that dose not solve the problem ,replace the temperature blend door under right side (passanger side) . u might need to take out the entire heater case of ur ...

Question about Chevrolet Suburban

1 Answer

...blend door actuator which controls the position of the air mixing door, and in vehicles with more than one air zone (passenger/driver, front/rear, etc.) there will be a door/actuator for each. These ...

Question about Chevrolet Suburban

1 Answer

blend door location on 2005 Yukon Front A/C blows luke warm - rear A/C fine. Mechanic says front blend door is not working. Where is it? Is there more than one? it is located in the air distribution ...

Question about Chevrolet Suburban

1 Answer

...are cold going to the rear a/c, look at the rear a/c control switch or blend door areas. If they are not, look at the switch from the front controls to the blend door for the actual rear a/c

Question about Chevrolet Suburban

1 Answer

Temperature blending doors might need a reset. Find the fuse and pull it for a few minutes. If that doesn't work you may need to replace the blend door actuator. Or your cooling system may be clogged

Not finding what you are looking for?
Cars & Trucks Logo

1,013 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...