...itself as there is a broken spring in the existing lock that is not allowing full operation of the locking ...
unlock seat belt My 07 LTZ suburban rear seat belts always lock up and have to take seatbelt off to unlock them check the mechanism where belt coils it should only lock when suddenly pulled out- ...
power lock replacement YOU HAVE TO REMOVE THE INNER DOOR PANEL, THE WINDOW SHOULD BE ALL THE WAY UP, YOU REMOVE THE SCREWS TO THE LATCH MECHANISM THERE ARE RODS THAT CONNECT TO LOCK ASS'Y. AND A ...
...locking mechanism works when pressing the 'lock' button. I have replaced the door lock actuator already. Both issues started at the same time. What would cause this (or what controls them)? this ...
Stucked wiper arms Wiper arms is stucked to the axel even after i have pulled out the lock's (metal plate positioned under wiper axel fitting), as far as they go. Have sprayed 505 for lubrication, but
Question about Chevrolet Suburban
i bought a 1985 gmc suburban 6.2 diesel and the power windows do not work but i have power to the locks and they work. windows do not work but the power locks works. does that mean i do have power to ...
...struck silimar issues with fords in NZ. If the actuator is getting full voltage during lock and unlocking, the actuator is faulty. Even though it wants to go it does not have enough strength to
...locking mechanism. The lock is disconnected and it is also stopping the window from going all the way down. I need to see what became disconnected so I can try to reconnect. If it a the barn door ...
I have 1995 2500 SLE suburban the driver seat will not work (move back or forward ) with the electric switch located on the left side of seat and the power door locks do not work (i hear a clicking ...
1,013 questions posted
Usually answered in minutes!
550 Questions
469 Questions
461 Questions
355 Questions
338 Questions