1998 Chevrolet Blazer "clutch hard pedal truck running" Questions

Ad

Question about Chevrolet Blazer

1 Answer

clutch pedal is hard down, the van still tries to move forward like the clutch hasn't fully disengaged. + Rapid pumping of the clutch pedal while the engine is still running can bring it right

Ad

Question about Chevrolet Blazer

1 Answer

...clutch and now it is hard to push in the pedal the cables is #1 top failure. and can damage car, or it can stick and cause a wreck http://www.fixkick.com/tranny/clutch/clutch-on-kick.html never run ...

Ad

Question about Chevrolet Blazer

1 Answer

hard clutch pedal i want to know how to bleed the servo unit on the landrover freelander as my pedal is very hard to press down You cannot bleed a servo. it runs using the vacuum from either inlet ...

Question about Chevrolet Blazer

1 Answer

clutch pedal in hard to keep running/ Any ideas? thrust bearings are bad and the flywheel is moving out of range of the crankshaft sensor, or the crankshaft sensor is sitting too close to the flywheel

is on a reason it has a code stored needs to be read,2.sounds like it needs throttle body cleaning,and3.if clutch is hard means master clutch cyl is bad if hydraulic and if manual cable is worn. TIM..

Clutch pedal of my Sorento 2012 has become very stiff. It is specially very hard to drive in the traffic. Odo meter reading show 560000 km run as of today. what is the problem? Get your head down on ...

Question about Cars & Trucks

1 Answer

...Clutch doesn't completely disengage when pedal is completely pushed to floor. If engine is running and you are in neutral, the gears grind if you try to put it in reverse with the pedal to the ...

CLUTCH PEDAL IS VERY HARD ENGINE RUNNING, CAN SHIFT BETWEEN GEARS WITH SHIFTER, YET RELEASEING CLUTCH PEDAL, AND TRUCK DOESNT GO.?????? REPLACED PEDAL BRACKET, NEVER OPENED CLUTHCH SYSTEM..???? WORKED

clutch. While bleeding never got pressure in pedal, have fluid leaking need to know how the lines run around engine to find leak. Did you bench bleed the master or slave cylinder ? Is Your Brake pedal

Question about Chevrolet Blazer

1 Answer

...will run and you can move the gearshift from one gear to another, but the car does not move forward or in reverse. you nead a new clutch as it sound like it has fel to bits ,, from age or hard ...

Not finding what you are looking for?
Cars & Trucks Logo

1,772 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...