1995 Chevrolet Silverado 2500 "1990 chevy 1500 wiring" Questions

...chevy diesel 2500, i want to know if the wiring harness from my 1990 chevy 1500 will work on the 95 i plan to use the motor from the 90 as well? i dont think so cause 95 everything changed to ...

...1990 chevy 1500 and I can't get any spark at the the plug wires changed coil from a truck I know works what else can I look for to be bad? the truck was running fine then started to sputter then just ...

...1990 chevy 1500 my truck is a chevy c1500 4.3 1990 there are to ground wires attached to the thermostat housing what are they the ground for They are engine grounds for all electrical components on ...

...1990 chevy c 1500 454ss pick up truck For the 1990 Chevrolet C1500 454ci = 7.4L V8 = "ss" = "big block" Click on the the following: direct, Free Link. It has the Serpentine Belt Diagram for the 7.4L ...

1990 chevy 1500 4X4 5.7L with 292K miles. Engine runs rough as if missing. Changed plugs, wires, dist cap, rotor button, used CRC throttle body cleaner, but still doesn't run smooth at idle or higher ...

...chevy 1990 throttle body type 2 top injectors. It takes several cranks to start if it even starts at all without flooding the engine. _ having this problem before I had replaced the throttlebody, ...

...chevy 1500 1990 truck won't start brake line on driver side under brake booster glowing red from heat please help Metal brake line is probably touching either a terminal on the starter motor , or has ...

...1990 chevy 1500 5.7L What would cause me to not have spark on some cylinders but i do on the others? Ive changed the ignition coil ignition module and plugs almost brand new wires Did you change the ...

...1990 chevy fullsize 1500 2wd 4.3 v6. The tach wire tells the computer information it needs to have engine control.Please rate if this was helpful,thank you. The tach wire should be removed completely ...

1990 chevy 1500 4x4 5spd. New plugs,wires, cap, button, tps, coolant sensor. Hesitation under throttle. And also runs bad after warmed up. Im fed up with throwing parts at this problem. Im thinking ...