1984 Chevrolet K1500 "ignition module" Questions

...ignition module, dis-connect the wire connector from the ignition module and if battery voltage is not present at the connector to the ignition module with the key in the "Run" position but it is ...

...ignition module inside of the distributor, and if there is battery voltage there at the ignition module, then either the ignition module or the pick-up coil inside of the distributor will be the most ...

...ignition module good. I replace the ignition module on the distributor but the old one tested good as well. The fuel pump relay was replaced. Turning on the key yields voltage to fuel pump relay but ...

...ignition module was burned out by the mechanic during installation. the second distributor seemed to go in ok but every since i've been driving the truck the ignition module burns out frequently. ...

...module & ignition wiring harness,also I must add that reprogramming is also required for modules & both keys.Unless you know a GOOD GM mechanic who will do this on the side & get you the parts at his ...

...ignition module on this model is bad to go bad,When this truck dies like that again,check to see if it is firing.If it is not giving any spark,replace the ignition module,if it does not fix the ...

chevypick up 1989 1/2 4.3 ditributer and coil packsparkplug but still stall check ignition control module change you spark plug wires and replace your ignition control module

...ignition module located behind the glove box or under the hood? That depends on what you mean by ignition module. If you are talking about your trucks ECM or on board computer then that is located ...

...module. There is a sensor in the ignition switch that "sees" the key (connected to this module), and allows the engine to start/run. Could be the sensor or the module. My problem was the module. Seem ...

wheres the ignition module located want to remove ignition module The ignition module is inside the distributor.