2004 Chevrolet Tahoe "put tension pulley chevy" Questions

Ad

Question about Chevrolet Tahoe

2 Answers

...pulley, route up putting back side of belt around w/pump then continue rest of belt around outside of remanning acc. leaving top idler last. put 3/8 drive ratchet into tensioner and rotate down ...

Ad

...pulley square hole. Playing attention to the routing of the belt as you'll have to put it back on, look for the diagram or draw your own. after it's off remove the bolts that hold it on and ...

Ad

pulley on the tensioner that a 3/8 socket extention fits neatly into . Put it on  a socket wrench put the extion in to the slot and push the preload spring bascily the tensioner toward the center

...put it back.  You draw the belt and pulleys on a sheet of paper before removing, otherwise there should be a small diagram of the belt and pulley positions on the fan shroud or radiator

Question about Chevrolet Tahoe

2 Answers

put belt back on? has to be an adjustment somewhere. The serpentine belt tensioner has a 3/8 drive rachet square on it. By attaching a 3/8 drive rachet and a strong forearm, pry the tensioner back and

...put the serpentine belt back on the power steering pulley twice and it keeps coming off Pulley looks like its out about an inch further then the housing I can think of three things to check. Proper ...

...put it on a socket wrench and push it toward the center of the engine this will allow you to slip the belt the tensioner pulley .. AND FOR THE FIX IT TEAM TENSIONER IS THE CORRECT SPELLING OF ...

...put on it to release the belt tension. Note, that once the belt is off, the tensioner will swing further than it was before, since the belt is not there to stop it. So when you put the belt back on, ...

...do I release the tension on a serpentine belt for a 2001 Chevy Tracker Unload the belt tension by putting a wrench on the automatic tensioner pulley, it is the one that moves when the engine is ...

...The belt tension is automatically adjusted with the tennsioner pulley. As far as putting it back on, I am not sure what you mean, you just need to bolt it back up and pull the belt over the

Not finding what you are looking for?
2004 Chevrolet Tahoe Logo

1,468 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...