2004 Chevrolet Malibu "brake lights working good" Questions

Ad

brake lights don't work, one in back window works but ones on tail lights don't checked bulbs and fuses and they are okay I would check the wiring to the 2 side lights, and make sure they are grounded

Ad

Question about Chevrolet Malibu

1 Answer

...brake lights work. i have changed stop lamp fuse in dash fuse box and the long brake light switch in front of brake pedal. any suggestions what to try next have you checked the bulbs?. my next step ...

Ad

Question about Chevrolet Malibu

1 Answer

is it both lights? If yes, check 15 amp stop light fuse first. If good, check brake switch above pedal. If only one brake light isn't working, you have a broken wire. See diagram below to trace wires

brake lights not working. Brake lights come on when car is started, so I know that (new) bulbs are fine. Any ideas? Right side lights are fine. the socket (or board) that the bulbs are on are known to

Question about Chevrolet Malibu

1 Answer

brake lights wont come, fuses and bulbs are good These cars are famous for this , i have repaired a few with the same problem, this problem is due to a bad brake light switch, this switch is located ...

Question about Chevrolet Malibu

2 Answers

...brake lights are good then you need to see what it is they are not getting. they need ground and power, not getting one or the other. there is a splice pack that i can see on the wiring diagram, but ...

...control light comes on when depressed and normal operation, but no ground to compressor clutch. Brake system good, fluids topped off, sensors clean, friction linings over 50%. ABS light on doesnt ...

Question about Chevrolet Malibu

1 Answer

BRAKE LIGHTS GO THROUGH THE TURN SIGNAL SWITCH SO THEY CAN BE USED AS TURN OR BRAKE LIGHTS. I'M ASSUMING THE BULBS ARE OK. REMOVE THE PLASTIC FROM AROUND THE TURN SIG. SWITCH. STAY AWAY FROM ANY WIRES

Brakes tend to catch, release, and catch again when coming to full stop. ABS light comes on and then brakes work fine again. Also...probably non-related? Oil pressure light will come on occasionally o

Ls The most common reason for the 3rd brake light not to work is mostly due to a blown bulb, some cars have two or three bulbs in the 3rd light, start by replacing the bulb and go from there. good day

Not finding what you are looking for?
2004 Chevrolet Malibu Logo

1,655 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...