2004 Chevrolet Impala "changing heater blend motor" Questions

...core (for cold air) The drivers blend-air door may be broken or the motor that moves the blend-air door is malfunctioning. your problem is the driversside blend door actuator.its bolted to heater

...heater and A/C. The passangers control works in either mode but the drivers only works when the A/C is on, when the heat is on it wil only blow cold air even when set to full hot. There is a motor ...

...Heater problems Three are two problems that occured at the same time Temeratute controls on dash are in the hot mode and cant be changed also the AC compressor won't engage when the AC control is ...

...heater control the temp doesn't change. A/C side works perfect. your problem is caused by the air temperature control blend door actuator motor being defective, the little motor moves the door that ...

...heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most ...

...Heater Blend Door Actuator) that moves the linkage to change where the air comes out; its located underdash at right of the gas pedal. Generally the problem is the linkages from that motor to your ...

...heater dash control panel with a used one with no change. The system works when I change the blend door by hand. Is there a wiring diagram for this system? What should I check next? Yes there is a ...

...are some real good videos. if your heater core is bad then change out heater core as well as blend door. the blend door is only 15-20 bucks and smart maintenance. hope its just a clogged heater

...heater core is ok, at that point u will have to check the blend door to see if it moves, this door diverts the air over the hot heater core or the cold AC evaporator core, it is often controlled by a ...

...heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most ...