...sledge hammer hit around the drum to break it free. Hit it hard but not enough to damage. If that dont work then you can use prybars work side to side getting it off little at a time. There should be ...
Question about Isuzu Cars & Trucks
...hammer handle in the exhaust port. Invite a large friend to help. Lift straight up it may be mounted on alignment pins. hit it with wood, never hit metal to metal unless using brass drift pins to ...
Question about Chevrolet Cavalier
...it towards the rear of the car. If this doesn't work, hit it a bunch with a sledge hammer. Good luck----------------------------------------------------------------------------------------- opcom ...
...hammer....I am talking like a 3lb, mini sledge. strike and turn rotor, strike and turn. This will break the rust loose and allow the rotor to separate from the hub. Your rotor will either need to be ...
...slide hammer and drill and pull where it needs or if there is damage to the bumper rebar ( metal bar under cover) you can get a ratcheting "come along" and set the ebrake and chain the other end to a ...
Question about Cars & Trucks
...slide 4X4 across from under vehicle. block so it is against rim, then smack 4X4 with LARGE sledge hammer. - Some people apply heat to the centre of the wheel where it is jammed. I don't like doing ...
...hammer and sprayed on 2 cans of rust remover (which I let soak in overnight). They still won't move. It appears that the rotors are fused or rusted to the plate containing the lug bolts. Is there any ...
...slider assembly & caliper. Will need to probably spray penetrating oil around rotor hub. Hit rotor on side of hub with sledge hammer & it will slide off. Inside are your emergency brake
...arm bracket. How do you get it to slide into place? I had this happen the other day. I just took a 4 pound sledge hammer and bent them open. The bolts will snug them back when you tighten them
Question about Chevrolet Cavalier
...sledge hammer or gun. What now? Probably need to take the radio out to remove it, it's probably jamed some where inside. when the tool is inserted in the two holes what it is doing is pushing in a ...
2,054 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,339 Questions
1,200 Questions