reverse lights are working and the same bulb runs all three lights (brake, turn sig., and reverse) I can't seem to figue out any other reason besides a fuse as to why the reverse lights would work
...have a friend who did that and the bulb he got was designed such that they high and low beams were reversed, so he always had one headlight on high and the other on
...and rotate it counter-clockwise to remove it from the lamp. Remove the bulb from the socket. Installation is the reverse of removal. Hope helped with this (remember rated and commented this
...reverse for the back-up lights....this is usually an indicator that you have a bulb that is faulty or burned out. check that all of the blinker bulbs are working. a faster than normal flash rate ...
...bulb housing... So any ideas??? Hello! If the transmission is a standard there is a "back up switch"with the wire colors Pink and Light Green which closes in reverse and applies battery (12 volts) to ...
...do is to turn the socket and remove it,pull in the tabs on the bulb and pull it out.Installation is reversed for this removal procedure. Hello and welcome here is the instructions for replacing the ...
...bulb goes and the owner does not notice until the 2nd light is also lost. 2. Check the fuse and ensure it has not blown. This is unlikely as the fuse for the reverse lights also usually covers other ...
...the bulb, wipe your finger prints from the bulb with a soft cloth and reverse the steps listed above. The oil residue from your fingers will often cause the bulbs life to be shortened a great
...the way out, twist out the bulb socket. If you are just replacing the bulb, remove the old bulb, insert a new one, and repeat the steps in reverse order. DO NOT OVERTIGHTEN the screws. Hope this ...
2,054 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,339 Questions
1,200 Questions
