...brake light switch. The wiring from the brake light switch goes to the turn signal switch. When the turn signal switch is centered both brake lights are connected, unless the switch is faulty. When ...
Question about Chevrolet Cavalier
brake light stays on when off.1992 chevy cavalier Should be on brake pedal under dash, could be brake switch is sticking or bad try pulling up on your brake pedal, if tail lights go off that's what it
...ignition. How do i change out the part? CHECK BRAKE LIGHTS FUSE.IF OKAY BRAKE LIGHT SWITCH BAD OR TURN SIGNAL SWITCH FAULTY BECAUSE BRAKE LIGHT SWITCH AND TURN SIGNAL SWITCH SHARE THE SAME
Question about Chevrolet Cavalier
releasing the plunger, lights go out when you release the pedal. this switch has a fuse @ fuse block. check it ! if ok, and brake lights do not come on replace switch, & mount properly in bracket
...BRAKE LIGHT SWITCH IS FAULTY. IT CONTROL THE BRAKE TRANSMISSION SHIFT SOLENOID ALSO THE NEUTRAL SAFETY SWITCH.IF FUSE AND BRAKE LIGHT SWITCH IS GOOD.YOUR PROBLEM COULD BE A FAULTY NEUTRAL SAFETY ...
...brake light switch mounted to the brake pedal. Look to make sure the plunger is moving in and out fully probably just the brake pedal switch that doesnt return properly. You can either replace it or ...
Question about Chevrolet Cavalier
brake light / turn signals on 2001 Chevy Cavalier My 2001 Cavalier has lost the rear brake lights and turn signals and hazards. The center brake light still works. I have checked the bulbs and all the
Question about Chevrolet Cavalier
...brake light switch. What else could it be? has no brake, hazard or turn signal lights. Ive changed the bulbs, checked fuses, replaces the brake light switch. What else could it be? replace your ...
...brake light switch above the pedal. Check to see it it's aligned properly such that there is clearance between the switch and the pedal arm when you press the pedal. You can verify the switch is bad ...
...brake light switch on the back side of the brake pedal. You can test it by disconnecting the plug from the switch and use a jumper wire or paper clip between posts on the plug, lights come on, bad ...
2,054 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,339 Questions
1,200 Questions
