2004 Chevrolet Blazer "chevy joint ball replace" Questions

Chevy Blazer 4WD. I had everything loose and could even move the ball joint around but could not get it out. Do i have to take the upper ball joint loose or can i just loosen the half-shaft and get it

...joint on a 1996 chevy blazer four wheel drive you need to purchase a pickle fork from a local parts store to remove old ball joint then replace new one using a jack to put pressure on it while you ...

...ball joints on a 1997 chevy blazer. If they are the original ball joints you will have to remove the rivets on them. The new ones should come with replacement nut and bolts. You will have to remove ...

...chevy blazer Changing the actual ball joints themselves is pretty easy (the replacements just bolt in), however disassembling everything else is very involved, especially if you have a 4x4. Some of ...

chevy blazer 4 wheel drive. Raise vehicle up on jack stands so that the stands are under the lower controll arms and the suspension is "loaded" Remove the front tire(s) (if you break the torque on the

...ball joints and tire rod ends EVERYTHING!! 1997 chevy blazer ls 4dr 4x4 you can usually find all the parts your needing parts and labor for tie rods, ball joints, control arms springs shocks idler ...

Chevy Blazer. Do you know what type assemble this vehicle has and is it too complicated to do yourself or should I let the garage change? It's rather involved to replace them. The old ones are riveted

...chevy blazer 1995 could that be all it is? or does that sound like what the problem is and can u tell me if the upper a frame or lower or could it be a ball joint? The extent of damage is literally ...

...Chevy Blazer 86 and he was replacing his wheel barrings and after taking it off he is having trouble getting it back on due to the gears for the 4-wheel drive. Have any suggestions Hi there. If by ...

...chevy blazer has excesive steeringwheel pla. the truck wanders all over the road. Check the front end for bad suspension parts, Upper and lower ball joints, inner and outer tie rod ends, pittman and ...