Question about Chevrolet Monte Carlo
radio no longer has a display and none of the buttons work. I can still turn the radio on and off and change the station with the dials, but there is no display and no buttons work. Any ideas? All you
...radio display changes from LOC to a three-digit number. Write this number down. Don?t take forever, fifteen seconds max before the next step. 04. Press the AM/FM button 05. The radio display changes ...
...radio for at least five seconds until SETTINGS is displayed. 3. Press SEE PSCAN up or down arrow to scroll through the main menue. 4. Scroll until the TIRE MON appears on the display. 5. Press the 1 ...
...display? 2 ways disconnect the battery for about 5 minutes or hook up an obd II and erase the codes 1. Turn the ignition to ACC or ON and turn the radio off. 2. Press and hold the TUNE DISP button on ...
...radio if you have your code and need to know how to enter the code , it should be as follows . Unlock procedure for six digit codes. Push the "Hr" button, 000 will appear in display. Press the hour ...
...display screen. Now, just turn the radio on, and your ready to roll. There is an additional step you can take to remove all codes from the radio and start from scratch by entering your own ...
radio must be off press and hold the TUNE DISP KNOB for at least five seconds SETTINGS WILL DISPLAY PRess the SEEK PSCAN up or down to scroll through menu Scroll To OIL LIFE Then press 1 PREV Or 2NEXT
...RADIO, Press and hold the Tune disp, button for 5 seconds or until Settings is displayed, Press the seek ptype or seek pscan up and dow to scroll the main menu, Scroll until the OIL LIFE appear on ...
Question about Chevrolet Monte Carlo
...lamps 3 times within 5 seconds. Use the scan tool in order to clear the TPM DTC. Using the RDS radio, if equipped Adjust all tire pressures to the recommended kPa/psi. Refer to Tire Inflation ...
904 questions posted
Usually answered in minutes!
605 Questions
554 Questions
528 Questions
428 Questions
359 Questions