2002 Chevrolet Monte Carlo "turn harmonic bolt balancer" Questions

...Turn OFF the ignition. Remove the serpentine belts from the crankshaft pulley. Raise the vehicle. Remove the right front wheel and tire assembly. Remove the right inner fender access cover. Hold the ...

bolt holding the harmonic balance to crank shaft, it is left of right handed threads crankshaft keeps tuning when trying to remove Use a wedge in the fan belt to lock the harmonic balance from turning

...HARMONIC BALANCER BOLT.TURN OFF RADIO AND REMOVE THE DRIVE BELT AND REMOVE THE NEGATIVE BATTERY CABLE. REMOVE THE STARTER SO YOU CAN PUT A LARGE SCREW DRIVER OR LARGE PUNCH TO STICK IN ONE OF THE FLY ...

...The center puller bolt will rest against the harmonic balancer bolt head. Tighten the puller bolt and make sure the harmonice balancer bolt does not turn. The balancer should come off at this

turn clockwise or to the right, and when you are looking for some place to brace the breaker bar be sure that nothing else will get in the way or it will be damaged. Be sure that the breaker bar is on

...turn before it locks in place and turns the balancer. Remove yonder pulley and you will find the bolt holes are elongated. get another from a scrapyard (take the bolts too.) replace and you should be ...

...harmonic balancer tool to remove it. the tool holds the balancer so it does not turn when taking bolt out. most balancers are torqued to about 5 or six hundred lbs. the best way to remove is put ...

harmonic balancer Dear Sir,Which way do i turn the bolt to get my harmonic balancer off my car. Thanks Wendell, The bolt will turn left,counter clock wise to remove.

...Is this left handed threads? Looking at the front of the engine, the harmonic balancer turns clockwise when running. You will need to turn the bolt anti clockwise as it is a normal right hand

...turn the key inside the car, to engage starter, to spin the crankshaft,which may take several attempts, of turning the key, and putting socket back on, they are very stubborn,to break the center bolt ...