...start my 2002 astro van its was damp this morning. It almost started then kept cranking almost starting. It sounded like a car that was flooded. Still not starting. I can hear the fuel pump when you ...
Crossfire will not start The problem started a couple of month's ago. It would crank but no start. It would start up and idle rough with no throttle response and then die. This would happen repeatedly
...start whats the problem with my car??..2004 crysler crossfire Check starter motor wires are connected and clean and tight.check the very thin wire at the starter is clean and tight.ALL WIRES ARE ON ...
Question about Chevrolet Astro
...the alarm and anti theft immobilizer. https://www.google.com/search?q=2004+Chrysler+Crossfire+no+crank+no+start and stuck in Park https://www.google.com/search?q=chrysler+crossfire+stuck+in+park
Question about Chrysler Cars & Trucks
...crossfire) jumps then stalls. It may or may not restart. I have replaced both the cam and crank sensors. It would not start this morning. Generally if it cranks good but won't start, have a helper ...
...crossfire starting problem the car will start after you stop and try to restart nothing. not drawing down any lights when key is turned. after trying turning key it will start I had this problem and ...
cranks but no start. slammed the hood one time and it started. next time i left it for a couple of hours then it started. Now it wont do anything you might have a loose ground some were trace the ...
96 skylark, 2.4, auto just bought the car, it sounds like it wants to start but back fires thru the intake and exhaust, I checked the timing and both cams (8mm bolt installed, good) crank lines up, ...
Question about Cars & Trucks
...crossfire no start. alot of people have this problem. someone must have the answe lights but no start On chrysler it mainly a starter issue,If the vehicle just lights and no crank the starter can be ...
Question about Cars & Trucks
crossfire, replaced cam & crank snensor, it wouldn't start, fixed 3 solder joints on circuit board, it starts, runs and ideals, but once you accelerate past 2000 rpm it dies. May be a rev limiter , if
276 questions posted
Usually answered in minutes!
481 Questions
367 Questions
305 Questions
235 Questions
244 Questions