1999 Chevrolet C2500 "replace head gasket chevy 2" Questions

Ad

Question about Chevrolet C2500

1 Answer

...ignition system but still has problem could be one of several things 1) run a compression check, if it low on that cyl then you have a blown head gasket or burnt valve 2) could be the ...

Ad

Question about Chevrolet C2500

1 Answer

...resistance 00 chevy metro 1.3l just replace head gasket and had head work new timing belt timing/compressing good reassembled adjusted valve attemp to crank and #1 #3 s/plug foul #2 #4 good need ...

Ad

Question about Chevrolet C2500

2 Answers

...replace the head gaskets. It sounds like you had a blown head gasket from the start. Here's what to do. 1. Replace the head gaskets (will need intake manifold gasket as it need to come off for this ...

...head gasket, had small leak started up after replacement then there was a misfire while idling. Had ignition coils and module tested, replaced coils, wires and sparkplugs,module okay. Still a ...

Question about Chevrolet C2500

1 Answer

Head gasket replaced about 3 years back with intake manifold gaskets. Again 2 years back replace intake manifold gaskets again. A Year or so replace water pump. 1 month ago replaced raditor. Therostat

...replace it,, (2) fouling,? under performing, this can have a few causes i,ll list all, pressure loss in cylinder due to either worn piston rings or valve seatings, or head gasket,?(a) piston ...

...head gasket and valves replaced about 2 yrs. ago. Could this be the catalytic converter? I have overf 120,000 miles on the car "The car didn't overheat" you may have a blown head gasket, also if ...

...head to change gasket aligned timing marks need to know how to remove timing chain off valve gears to remove head is there a tensioner access somewhere on a 2005 chevy cavalier 2.2 Watch this GM 2 2L ...

replace the bolts during head installation may reduce clamping force and head gasket service life. To install new head bolts on these engines, use a torque angle tool and: Thoroughly clean the threads

head gasket blown water in number 2 cylinder would this be just a blown head gasket or maybe a cracked head also?and how hard are the to remove and to retime engine.never changed one on a saab.and ...

Not finding what you are looking for?
1999 Chevrolet C2500 Logo

86 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...