which timing nitch do u use on pully to do timing on a 96 blaser 4.3 vortec Hello eggy753: My name is Roger and I will answer your question. GM did put a timing mark and notch on the engine. How every
...with timing mark, distributor rotor is at #1 on cap. Blazer starts but does not run like it is in time. you need to use a timing light to get initial timing correctly set- PROCEDURE: Set timing ...
cant set timeing 1994 chevy 5.7 timeing was set two times. but still jump back up 15 degrees befor tbc . so can you tell me the problem ? there is some engine wear and timing chain cud be at ...
what are the timing specs for a 1991 chevy s10 blazer 4x4 4.3? changed timing chain and gears and timing is off. got marks together but still won't crank. the timing spec is 0degrees at idle, also ...
There is a way to set base timing on a 4.3 liter motor, right. ? if your computer is mounted under the hood the timing is not adjustable.the computer sets the timing.if it is not under the hood,then ...
...Marks,Clean it all the way around it with a Degreaser wipe it off rotate your enging a bit at a time and line up your timing marks with the Pointer which you'll also see ,It just looks like a
hard to start after short time standing 2002 chavy blazer I have problem starting my car every time when the car is standing for a short time. I tray many time to start, suddenly starts the Engine and
...please feel free to let me know. Thanks, Midwest-tek it has a timing chain that should last a long time
Question about Chevrolet Blazer
...timing chain ( timing set ), seal and a new cover. parts cost less than 100 dollars. MOST OF THE TIME OIL LEAKING PROBLEMS WOUND BE THE CRANKSHAFT FRONT OIL
do timing lines align or is it 10 degrees before to set timing chain are theu supposed to be aligned or ten degrees before timing line Here's a link to the timing chain. should be aligned
2,389 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,619 Questions
1,503 Questions
982 Questions