wire.now take two pairs of pliers.one to hold the black casing and one to pull the wire.that should open hood.once hood is open you'll see where cable attaches to hood latch.that cable needs replacing
...open hood the the lever will not release the hood. Used plires to try to open, no luck. Have read that you can use long screwdriver, how and where. The best solution I've come across is a coat hanger ...
...open the hood of my 89 Blazer. The pull-handle(T-handle) has come off the cable and no amount of pulling the cable with a pliers will pop open the hood. How can I open the hood from the outside? A ...
to open the hood the cable was loose (detached) This same thing happened to my Blazer. If you reach your hand up behind the front bumper and use a hammer you can hit the release latch and it will open
hood will not open Try to open it by having someone holding down on the hood while you operate the release lever. They might need to push down and release it several times before it opens. If it does,
...open hood and can't seem to get it open your gonna have to trace the cable to the latch thru the grill and try to "hook it" with a long pic or somthing like that. thats the only way to open it. good ...
...open the hood there is a cable attached to it . The cable runs to the hood release mechinsam and it tends to streach if the release mechinsam is not moveing freely .The way to open the hood at this ...
Question about Chevrolet Blazer
open hood latch inside blazer just moves too easily and wont release so the hood will open. how can I get the hood open if the cable is not broken then pull the release then take the side of your fist
...HOOD OPEN TO REPAIR first, try smacking the hood at one of the front corners while someone else pulls the release handle. or even after you've pulled on it. if that works, once open, adjust and ...
2,389 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,619 Questions
1,503 Questions
982 Questions
