...overheating before it running rough,we change all spark plug and spark wire,distributor cap and rotor,inlet manifold gasket,we also test the engine compression was all 150psi plus, but still the ...
...distributor housing. Ignition module overheating is a common problem, and can cause stuttering, poor fuel economy, power loss or engine shut-off after warm-up. A classic sign of module overheating is ...
...time. But will cut of in about 15mins & not crank back up. We have had the following replaced: distributor, ignition module, coil, throttle position sensor, spark plugs, timing reset, fuel
...overheating and the lost of oil pressure. Check your condition of oil to make suer there is no coolant mixed with your oil and also check your coolant in the radiator when the engine it cold. Don't ...
...overheating. whats wrong with it? Most likely the cause of the ignition module burning out is because of the ignition coil, and you should try replacing the ignition coil and the ignition module both ...
...suggests a Laundry list of things that could be wrong . I have replaced,plugs,wires,cap,rotor, ,distributor,coil,EGR,catalytic converter O2 sensors. I unplugged battery to reset computer etc. ...
...1998 chevy blazer with a v 6 it will not start and I'm not getting any fire I change the plugs the distributor cap the Roeder and plug wires I am still not getting any fire what could it be I think
...days it refuses to start...plenty of gas, put water in radiator. I hear suggestions that the distributor cap (or equivalent) maybe wet or plugs maybe bad. But if the spark plugs are the
...overheating, then started making horrible grinding noise. Just bought this car a week ago. already replaced distributor cap, rotor cap and air filter b/c it was missing really bad. was told i need to ...
2,389 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,619 Questions
1,503 Questions
982 Questions