1998 Chevrolet Monte Carlo "taurus p0340" Questions

Question about Chevrolet Monte Carlo

03 Taurus with DTC P0340, P1336

...Taurus with DTC P0340, P1336 My 2003 Ford Taurus is giving me a code of P0340 - CAM Position Sensor Circuit Fault. Secondary code of P1336 - Misfire Monitor Hardware. Anyone had a similar fault code ...

Question about Chevrolet Monte Carlo

1 Answer

Where is the camshaft sensor located on a 2002 ford taurus ses?

...ford taurus ses? got a code P0340 and advance sold me the part - I just gotta figure out where it goes Look at front of engine, attached to timing cover down near crankshaft pulley, if it's 3.0L

Question about Chevrolet Monte Carlo

1 Answer

Hi i bought a code reader and these codes came up

taurus was running,they are P0340 and P1400 what do they mean and what is the fix if some one know please PO340 is the camshaft position sensor needs replacing. P1400 is Differential Pressure Feedback

Question about Chevrolet Monte Carlo

1 Answer

Have a 99 taurus 3.0 ohc had a P0340 code changed

taurus 3.0 ohc had a P0340 code changed sensor and synonizer used tool to locate when installing put motor at TDC first now next day get P1309 Do i need to redu complete process again? I would recheck

Question about Chevrolet Monte Carlo

1 Answer

98 Taurus P0340 code still present after replacing

...Taurus P0340 code still present after replacing camshaft sensor and synchronizer. Car not starting all the time. I do not see the spark when car will not start. Then replaced the crank sensor. Still ...

Question about Cars & Trucks

1 Answer

I have 2001 ford taurus ohv it wont start and

I have 2001 ford taurus ohv it wont start and check engine light and oil light is on I also have a code of p0340 That is a cam sensor error. Check out all the videos on Youtube.

Question about Chevrolet Monte Carlo

1 Answer

I changed out the MAP sensor,and the idle air sensor on my 2006 Ford Taurus. This was before I had the fault code read at a dealer. Code came back as P0340, and P0430 Band 2 cat worn out. I had the ca

...Taurus. This was before I had the fault code read at a dealer. Code came back as P0340, and P0430 Band 2 cat worn out. I had the cam sensor replaced at their recomendation. Does the other code mean ...

Question about Chevrolet Monte Carlo

1 Answer

Engine service light / 4 codes read description below

engine service light / 4 codes read description below #1) P1744 - TCC soleniod circuit range/perf #2) P0340 - camshaft position sensor A - bank1 circuit malfunction #3) P0401 - EGR flow insufficent #4

Question about Chevrolet Monte Carlo

1 Answer

I have 1998 ford taurus

i have 1998 ford taurus with the code p0340,it is not doing anything but the service engine light popped on Camshaft Position sensor circuit malfunction is what the book lists for this code.

Question about Ford Cars & Trucks

2 Answers

Replaced cam shaft sensor on 2005 ford taurus and still get code p0340. Possible fix distributor? According to AutoZone computer suggested parts.

...taurus and still get code p0340. Possible fix distributor? According to AutoZone computer suggested parts. This means the sensor isn't working. That can be caused by a bad connector or broken wire. ...