...kg) of pressure exerted. Alternator electrical connectors, then torque the alternator bolts to 17 ft. lbs. (23 Nm) Air cleaner assembly Negative battery cable Before servicing the vehicle, refer to ...
...kg (22 lbs) pressure exerted when reinstalling a new belt. Tighten the generator upper mounting bolt. NOTE : Refer to Fastener Notice in Cautions and Notices. Tighten Tighten the generator upper ...
Question about Nissan Cars & Trucks
3.2 kg-m, 21 - 23 ft. lbs.) Step 5: 50° - 55° (target: 50°) clockwise To confirm it is a head gasket, do a compression and/or leak down test. Wouldn't hurt to pressure test your cooling system as well
...23 Nm (2.3 kg-m, 17.0 ft. lbs.) Pour new specified oil until oil level reaches bottom of oil filler plug hole (3) as shown in figure. NOTE: Hypoid gear oil must be used for differential. It is highly ...
...kg) for a used belt. If a belt tension gauge is not available, adjust the tension to 0.31?0.35 in. (8?9mm) deflection for a new belt or 0.35?0.39 in. (9?10mm) deflection for a used belt. Tighten the ...
...Kg). Adjust the valve clearances. To complete the installation, reverse the removal procedures. Torque the crankshaft pulley-to-crankshaft bolt to 108 ft. lbs. (147 Nm). Fig. 1: Timing belt routing - ...
133 questions posted
Usually answered in minutes!
76 Questions
69 Questions
67 Questions
1 Questions