...kg (22 lbs) pressure exerted when reinstalling a new belt. Tighten the generator upper mounting bolt. NOTE : Refer to Fastener Notice in Cautions and Notices. Tighten Tighten the generator upper ...
Question about Cars & Trucks
...15 mL for every 10 kg and for the mare is 30 mL for every 45 kg. The foal weighs 300 lbs and the mare weighs 1200 lbs. what are the dosages to give 1 kg is 2.2 lbs 300 / 2.2 is 136.07 136 /10 is 13.6 ...
Question about Chevrolet Metro
...15 Nm (1.5 kg-m, 11 ft. lbs.) . Tighten all bolts by 80 to 90° in alphabetical sequence. CAUTION: Do not tighten bolts more than 90°. Further tighten all bolts by 80 to 90° in ...
MY TURKEY IS 5-7 KGS, HOW MANY LBS IS THAT One kilogram is about 2.205 pounds, so 5-7 kg is about 11-15 lbs.
...kg-m) 15. Install water pump pulley. Tightening torque: 9.0 - 12.6 ft. lbs. (12.3 - 17.2 Nm, 1.3 - 1.8 kg-m) 16. install generator belt and adjust the tension. 17. Install P/S and/or A/C drive belt ...
15 All-Season Curb weight1633 kg (3600 lbs) Wheelbase2750 mm (108.3 in) Length4865 mm (191.5 in) Width1825 mm (71.8 in) Height1420 mm (55.9 in) Cargo Volume14.5 cu.ft. (.41 M3) Fuel consumptionCity 12
15?30 degrees. Turn wheel hub several times in both directions. Wheel bearing should be seated correctly. If necessary, measure wheel bearing preload. NOTE: Measure wheel bearing preload with a spring
...kg.cm, 2-3 ft. lbs.) 8. Install the timing belt cover. 9. Install the new intake manifold gasket and the intake manifold. Tighten the nuts and bolts to the specified torque. 10. Install the new ...
133 questions posted
Usually answered in minutes!
76 Questions
69 Questions
67 Questions
1 Questions
