...changed sensors and still overheats Did you change the thermostat? And have you checked to make sure the fans come on? Is the temperature gauge giving you false readings? Thermostat???. Have you bled ...
...thermostat or head gasket problem. If the coolant was changed recently system may need bled. May have partially plugged Radiator. Flush maybe. Hi, The problem could be caused due to any of the ...
Question about Chevrolet Lumina
...changed water pump and therm car now has no heat and runs hot there should be no air in the cooling system and the system can be bled by using a pressurising equipment . Ensure that the thermostat is ...
Changed thermostat,bled system from bolt above thermostat and was fine. Now the car is overheating and no heat at all. Changed thermostat,bled system,checked for flow in radiator everything good. Heat
Question about Chevrolet Lumina
...goes crazy instead of showing the actual temp Check the thermostat, electronic coolant temp sensor, .. or if the system has been opened ..ex changing the thermostat. . Has the system been bled of
...bled? thermostat is on the waterpump. Follow the lower radiator hose to the housing. there should be three 10mm bolts should be holding the housing to the waterpump with the thermostat in between. If ...
Question about Chevrolet Lumina
changed cap and upper rad hose due to overheating & hose blew. bled system started engine waited til temp got to mid point but fan didnt come on and I shut it off ? overheated, hose had come blown
...changed the thermostat,if so there is air in the cooling system and needs to be bled out,water will not be in contact with the temp gauge,the reading it is getting is from steam.if not,it may be time ...
Question about Cars & Trucks
...the system locked in after changing rads..many vehicles need the system bled of trapped air whenever opened..I would .have all Checked and the system bled...one other sticking thermostat...good
...just change thermostat radiator is steaming and truck over hesting plllzzz help did you put the thermostat in with the proper end facing the engine block ? also is all the air bled out of the system
961 questions posted
Usually answered in minutes!
964 Questions
809 Questions
661 Questions
448 Questions
418 Questions