...torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees clockwise. Step ...
...torque sequence and rocker bolt torque sequence 99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the ...
...Torque Sequence -------------------- Front | 7 2 4 6 | Of | 5 3 1 8 | Engine --------------------- | 5 3 1 8 | | 7 2 4 6 | --------------------- Step 1 - 12 Point bolts: Torque to 40 ft/lbs Steps 2 - ...
...torque specks for a 2.4 liter engine on a 98 plymouth breeze Fig. 1: Cylinder head bolt tightening sequence-2.0L SOHC engine Fig. 2: Cylinder head bolt tightening sequence-2.0L and 2.4L DOHC engines ...
...torque sequence on a 98 oldsmobile intruige When torqueing bolts on manifolds or heads you always start in the middle or center and torque in a circle motion and olny torque 1 bolt at a time. Start ...
...of rotation that is specified. This assures that the bolts are tightened to a maximum clamp load. To start out with, be sure to torque from the center out and there is a designated sequence to go ...
...TORQUE/SEQUENCE: Use the special tool and a torque wrench to tighten the bolts to 103 - 113 Nm (76 - 83 ft. lbs.) of torque in the order shown in the illustration. Tightening should be done in two or ...
...torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees clockwise. Step 5: plus 90-95 degrees ...
...torque in sequence as follows: Step 1: 72 ft. lbs. (98 Nm). Step 2: Completely loosen all bolts. Step 3: 26-32 ft. lbs. (34-44 Nm). Step 4: plus 90-95 degrees clockwise. Step 5: plus 90-95 degrees ...
114 questions posted
Usually answered in minutes!
54 Questions
42 Questions
37 Questions
36 Questions
33 Questions
