1997 Chevrolet Tahoe "cylinder" Questions

tork on head bolts 05 5.3 Cylinder Head M8 Bolts - in Sequence 30 N·m 22 lb ft Cylinder Head M11 Bolts - First Pass in Sequence 30 N·m 22 lb ft Cylinder Head M11 Bolts - Second Pass in ...

... which are not valid codes. Did you mean P0305? This is a diagnostic code referring to a misfire on cylinder #5. It looks like you've replaced parts that could be causing a misfire, but did not fix ...

...pads and rotors may have had nothing to do with this. It sounds like either really bad rear wheel cylinders or a bad master cylinder. I would tell you the master cylinder is the problem though. if ...

...be able to turn the switch with a screwdriver. If needed, you can drill another hole in the cylinder where you think the locking tab would be, then push the tab with an allen wrench. Remove ...

throwing aP-308 code p0308 is cylinder 8 missfire, it could be the plug on that cylinder,wire, or coil. also make sure the injector for that cylinder is ok!! have a good day! This is telling you that ...

1996 Tahoe #2 cylinder plug firing but not getting fuel. Checked exhaust manifold by spraying with water. All hot except #2 cylinder. Been sitting for about 6 months and before that some bad gas had ...

98 tahoe brake system contaminated replaced master cylinder, calipers, wheel cylinders and hoses, still not getting any fluid from the rear try bleeding the master cylinder check metal lines could ...

Misfire on #4 cylinder Missing on #4 cylinder of 99 chev Tahoe z71 vortex 5.7. Replaced plugs, wires, rotar, furl pump assembly. Still missing on #4. Any suggestions? bad fuel injector on cylinder

I have no brakes after ive replaced the brake line blead the brakes changed the master cylinder on a 97 tahoe 2 wheel drive 5.7 liter try to drive on gravel and hit brake hard to make sure the ABS ...

My 1996 tahoe is giving me cylinder 2 misfire And runs ruff idle For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting ...