1997 Chevrolet Cavalier "wear inside front tyres" Questions

...inside of the drivers side door that will tell you the original tire size. I wouldn't know because I don't know if your car came with the Chevrolet alloy wheels, or the standard steel wheels with ...

...front end of my 2000 cavalier. I changed out the wheel bearing but the noise is still there. The problem completely wore out the inside half of the tire,replaced tire to be sure I did not have a ...

...wear - wearing on both inside front tyres Uneven tyre wear is caused by either worn bushes or incorrect tracking. It sounds as though your car is 'toe in' and needs the wheels tracking - aligning. ...

...wear on the inside of the tire i believe it comes factor with a 4' lift so why is this if possible please help me figure out ivv heard that you need new upper Aarms or mabe both upper ad lower A arms ...

inside is there as adjustment to even out the wear? Both tires were just replaced. If it is only wearing on the inside edge your wheel alignment is wrong. The most common cause is the tyre is 'toe out

inside of front tyre Hi Just wondering if u can help me? My 97 trooper is wearing the inside of my front right tyre, its very bad and the tracking is ok, Ive heard of a shim pack that can be fitted to

...front passenger tyre is wearing down faster than the outher 3 tyres it isnt wearing on the just the inside or just the outside but over the whole width of the tyre any ideas wots causing this First ...

...the middle indicates too my tyre pressure and tyre wear on the outside is not enough pressure. if it's only on the inside or the outside of the wheel then the camber is out and needs to be ...

...inside the car as well. Should I use the lower (31) or the higher (35) figure for my tyre pressures? Hello, any pressure in between is fine, these are recommended pressures, i personally look at tyre ...

...wear is on outside left and inside right tyres no matter how often i have tha steering linned You need to have the front end checked for worn parts like ball joints or tie rod ends and if all is OK ...