1997 Chevrolet Cavalier "change flasher signal turn" Questions

...signal was not working. I changed the bulb and tried again and this time none of my signals are working, nor my hazard lights. I changed the fuses inside the car but that did not work. Last thing to ...

...signal switches flasher unit or blinker unit maybe hi if you have changed them, it more than likely be you indicator flasher unit relay this is the box that regulates the timing between flashes, try ...

...lights. Ive changed the bulbs, checked fuses, replaces the brake light switch. What else could it be? replace your flasher, it controls both turn signal, flashers also brake circuit runs

...turn signal switch, looked for bad grounds (not sure where all the grounds are located) no problem found. Did you replace the turn signal flasher unit? Put in a electronic flasher when changing

...do. EHHH? Ther are seperate flasher modules for signal lights & 4 way flashers. Put the 4ways on & listen.Locate this module & the other is in the same area close by. Change it. Good

.... How do you change flasher Turn your hazard lights on and listen for the clicking near your accelerator and brake pedals. Your flasher for your turn signals should be next to it. Just pulls

...& connectors with no change. The turn signal switches are known to go bad, try to use the turn signal switch and jiggle the lever after clicking to the left turn. Replace signal switch

...turn on wont blink Are you sure you got right flasher. 4 ways (hazard) flasher is on drivers side (left side) of steering column, in convenience center, and signals flasher, is on steering column, ...

...signal switch. In one of the turn positions, if you bridge out the 2 correct pins of the flasher unit, the indicators on one side should light when you move the switch to that position. Move the ...

change the flasher relay? sounds like the bulbs are fine the flasher relay sounds like it stopped working You did'nt say if all the lights are working ?  The lights won't flash( their not