...Ecm is making misfires happen in my 97 cav 2.2 and was wondering where it is in the car......also my diag will not interface with it remove the neg battery lead for about 5-10 minutes then try. this ...
Question about Cars & Trucks
...show that ECM faulty or network problem and my question is what should I replace with ECM unit. One of mechanic said it need full system to be changed Any advice goto dealer bc they can reboot the ...
ECM How do I reset/reboot ECM? There is 3 ways. Disconnect the battery and let sit for at least 15 minutes. You can get the scan tool and reset it. Lastly you can go to AutoZone and have them reset it
Question about Volvo Cars & Trucks
injector stays open when it should be shut. We have a 08 Volvo 780 D12 . We have replaced the Egrs, injectors, cups, egr temp sensor. They rebooted the ECM. I'm thinking the Injector Wiring Harness. ...
...dash panel all the light blinking. Turn the heater on, not power window,everything out of control. try disconnecting the battery for 30 seconds, this will reboot the ECM and may correct the ...
ECM is running a self test it is seeing something it does not like, keep it mine as with all computers they can "glitch" I would recommend disconnecting battery and letting it sit for about 20mins. if
Question about Mitsubishi Cars & Trucks
mitsubishi colt 2006 dim headlights not working (Full beam and side working) + mileage distance indicator in dashbord giving wrong readings + when switching on dim lights, there is a noise inside the ...
Question about Jeep Cars & Trucks
...ECM will have to "reboot". Often, this is enough to "fix" ECM and other extraneous codes. If/when your check engine light comes back on... reread the codes and compare them to the last ones. If the ...
Question about Chevrolet Cavalier
...may have corrupted ECU data .Try disconnecting battery for a short while so that vehicles ECM could reboot it self. Otherwise DIAGNOSTIC equipment will be required to reprogram ECU management system
...car stil runs. Get mor info. It cud b just a vacuumleak or computr needs reboot by unhookn batt You take it an find out what DTC - diagnostic trouble code is stored in the PCM / ECM engine computer , ...
2,509 questions posted
Usually answered in minutes!
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions
1,200 Questions