Engine Swap - 1997 Cavalier RS 2.2L Vehicle: 1997 Chevrolet Cavalier RS Engine: 2.2L 4-cylinder SFI-OHV 4-134 Transmission: Automatic VIN Code: "4" I just fixed the two main problems with the engine ...
Question about Chevrolet Cavalier
...Torque front cover bolts to 108 inch lbs. 35. Torque engine mount bracket adapter bolts to 81 ft. lbs., then tighten an additional 90° turn. 36. Install accessory drive belt. 37. Inspect cooling ...
...bolts. How tight each bolt should be is known as a torque specification and measured with a torque wrench to assure accuracy. The order in which the bolts are tightened to that specification is known ...
...bolts finger tight. Torque to: 30 ft. lbs. (41 Nm) Install the generator. Install the oil indicator tube bracket bolt. Install the exhaust manifold. Install the lower intake manifold. Install the ...
...bolts and torque them in sequence to 47 ft. lbs. (64 Nm) for the M11 bolts and 15 ft. lbs. (21 Nm) for the M8 bolts. Install the dipstick tube bracket to the cylinder head. Connect the front exhaust ...
...a tool to remove the slack in the belt after installing the new belt, and you'll need an inch pound torque wrench and a foot pound torque wrench that is able to go to 184 NM. air tools help
...bolts finger tight. Torque to: 30 ft. lbs. (41 Nm) Install the generator. Install the oil indicator tube bracket bolt. Install the exhaust manifold. Install the lower intake manifold. Install the ...
Question about Chevrolet Cavalier
...torque setting until all the bolts are set and then the final torque is obtained by angular setting of the head of the stud/bolt. Use the correct tensioning sequence as this is vital to set the head ...
...bolts Tightening torque :7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft) (2)Install the engine cover bracket (3)Install the PCV(Positive Crankcase Ventilation) hose and breather hose to the cylinder ...
...BACK UP THEN REMOVE AXLE NUT.WHEN YOU GET READY TO INSTALL NEW HUB BEARING TORQUE AXLE NUT TO 189 - 254 FT LBS AND NEW BRAKE CALIPER BOLTS TORQUE 125 - 170 FT LBS. LUG NUTS TORQUE 85 - 104 FT
2,509 questions posted
Usually answered in minutes!
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions
1,200 Questions