...rear end that wear out....are they hard to replace.....any help would be [email protected] I have this same problem with my 1996 Subaru Legacy 2.2 Wagon. There is a Subaru Service ...
...change in the Transfer case and Diffs. Mine did the same thing. I had the exact same problem with my transfer case. I ended up pulling the transfer case and it turns out that a bearing was worn out ...
...change one or more of them to get the air out of the system, they will usely spring a leak wearever there is a clamp that holds them in place. There are one line to each wheel and a main line that ...
...rear end gears, at 58 k, the transmission was replaced, at 65 k, the fuel pump. I then bought an extended warrantee just in time for the first AC evaporator. Then after 85 K, another AC. After 120 K, ...
...End Problems 2004 Dodge Ram Quad Cab 1500 4x4, 5.7 Hemi: Getting a rooring sound from front of truckwhen going down the road, faster that i go loader it is. I have done everyting i know to it, (both ...
...change.---Removal & Installation4L60E/4L65ETo Remove: Raise and safely support the vehicle. Place a drain pan under the transmission. If equipped with a drain plug, drain the transmission fluid. ...
...change on most automatics is messy. Draining the fluid involves loosening some bolts, removing others, and, after the pan is loosened, letting the fluid run out from the joint between the pan and ...
...change the rear brakes on my peugeot 406 estate and i am totally stuck! The pins that hold the brake pads inline are totally stuck. Am i doing something wrong or do i need a special tool to remove ...
...were burnt out. A quick 10 minute change of the rear brake light lamps fixed the problem. brake light warring both brake lights out dose not flash with 1 out were r the glow plug how do I get them ...
458 questions posted
Usually answered in minutes!
737 Questions
576 Questions
468 Questions
391 Questions
306 Questions
