...port it stalls The MAP is there to provide air pressure values from the inlet manifold to the engine control unit which in turn alters the pulse width of the fuel injection cycles. When the engine is ...
Question about Chevrolet C1500
...port. Now will not start. Is there a sensor that shuts off the fuel supply. Find out if that truck is equiped with a inertia fuel cut off switch, but I doubt that it is. Also have the fuel pressure ...
Question about Chevrolet C1500
...quit working. There should be a port on the fuel line where you hook up a gauge to check pressure. You might want to check the pump relay to see if the pump is getting power when you turn the key
port on the fuel rail under the hood, remove the cap, press valve to relieve line pressure and recap valve. If ground clearance is not high enough to get under vehicle and work, raise it with jack and
port on the fuel rail under the hood, remove the cap, press valve to relieve line pressure and recap valve. If ground clearance is not high enough to get under vehicle and work, raise it with jack and
...fuel pump issue or it sat overnight,which is ok. If you have a muti-port injection system,... man that would be so much to type. In that case I would buy a repair guide. That would be the same ...
check, where do I find them, and how do I fix 'em? Anyone wanna teach me? First most important things at the top of the list is fuel and spark. Make sure you have both. Pull the coil wire from the
...port on the base of the carb or on the manifold itself and adjust them 'till you get the highest possible vacuum reading, then turn each about 1/8 turn back in. To test fuel pressure, attach the ...
...pressure regulator, remove the vacuum line from it and start the engine. Look for fuel coming out of the vacuum port on the regulator. If you see fuel, replace the regulator due to a ruptured ...
376 questions posted
Usually answered in minutes!
584 Questions
420 Questions
403 Questions
331 Questions
284 Questions