blower motor only works on high speed. I changed the heat control assembly but the blower still only works on high speed. is the motor gone bad? No the motor is not bad or going bad, the heater blower
...blower motor, it works on low/med setting only. i changed the blower motor,resistor and even the main control panel in the dash, what else can it be? Check the connector to the control head that you ...
...motor and the switches and the thermostat. what else is there to replace that could possibly be the problem? you need to change the blower motor resistor, that was most likely your problem all ...
...blower motor speed control resistors. 2) blower control switch 3) blower motor The blower motor and speed control resistors are usually accessable from under the hood. Once you find the blower motor ...
...change resister, the other was the motor. Now my question is where is this stuff located? Where do I go to find a diagram? Blower/Heater Switch Operation: This electrical switch, located in a fuse or ...
blower motor only works on 4 Needs resistor. How do I change it? Have parts replace control head
...change from defogger to other vents. What are possible problems and solutions Sounds like the blower motor actuator which is vacuum driven. You most likely have a vacuum leak, preventing the actuator ...
blower motor on firewall,third one in from the pass. side,if it a central port system,relay is under center console in dash,again third one in from pass.side...I would recheck the ground wire from the
2005 astro van blower motor stopped working. Are there fuses to change? a blower relay only. hot wire the blower first to see if it works. if it doesn't replace the motor
blower relay is located to the right by the motor mounted on the firewall. It will have three larger wires from the relay and two smaller wires. you will need to unplug the connector and check the red
456 questions posted
Usually answered in minutes!
481 Questions
367 Questions
235 Questions
244 Questions
248 Questions