...transmission is heavy to be done,but yesterday when i start to drive,it got the first then the second and never ever go for the third however i increase the power, by the way i changed the gear oil ...
TRANSMISSION FILTER ON MY 2003 CHEVY MALIBU. hOW MUCH FLUID WILL i NEED ? When you change a transmission filter the general rule is you loos roughly 1/4 - 1/3 of your total transmission fluid capacity
...transmission place last month and they found a code that they cleared but it's still slipping. Did you have it serviced or rebuilt, If you had it rebuilt I would take it back to the trans shop for ...
...If your engine move either direction when you accerlerate or shift you have a bad motor mount or two. should a transmission filter seal be changed in a 2005 Impala when the filter and fluid are ...
...transmission slow to shift from 1st to 2nd and then from 2nd to 3rd. Probably due for a trans service--which is flushing the trans and replacing the trans fluid and filter. Change your thermostat I ...
...with my typical 1300 lb load and transmission started not shifting into third, and then indicator said transmission is hot. Am I stuck replacing it? You might try to change the trany filter and
transmission sets a "hard code" that causes a hard shift from 1-2. Stop by an Auto Parts store that has an OBD scanner and reset any codes. If that doesn't work, change the tranny fluid and filter and
...and it shifts gears only when it gets io 7000 rpms wat do i do Check transmission fluid level. Sounds like your fluid is really low. If you have a lot of K the tranny oil and filter should be
What model transmission I have & fluid capacity On a 2003 Chevy express 3500 extended van 4L80E, just changing the filter and fluid, about 8 quarts.
P0742 2003 Chevy cavalier The transmission torque convertor clutch not locking up. May need fluid and filter change.
649 questions posted
Usually answered in minutes!
904 Questions
942 Questions
867 Questions
830 Questions
647 Questions