1996 Chevrolet Monte Carlo "replace serpentine belt" Questions

...replace the radiator on a 2001 Chevrolet Monte Carlo 1. Empty the radiator 2. disconnect top and lower hoses on the radiator. 3. remove plastic cowling, (should be an upper and lower half with two ...

...serpentine belt slipping on one of the metal pulleys and the friction is causing the high pitch screech. The belt may need to be tightened or replaced, which is an easy fix. Could be the starter ...

...serpentine belt for wear and proper tension.You might want to try and pin point the source of the squealing.Start off by inspecting the belt and tension.As far as the keys a locksmith could come out ...

serpentine belt keeps coming off. does harmonic balancer keep it on. how do you change it Make sure you have the right size belt. If it's old then replace it. Then make sure you run it correctly or it

...serpentine belt came off track and when i start car one of the pulleys starts to rattle..it looks like the pulley is farther out then everything else..could it be one of the bearings in the pulley?? ...

...replace it? 3.8L Engine Turn OFF the ignition. Remove the serpentine belts from the crankshaft pulley. Raise the vehicle. Remove the right front wheel and tire assembly. Remove the right inner fender ...

...REPLACE THE GAS FILTER IN YOUR CAR.. IT USUALLY LOCATE IT UNDER THE CAR BY THE DRIVER SIDE UNDER...OR ALSO IT COULD BE THAT YOUR OIL CHANGE WASN'T DONE PROPERLY...!!!  check to make sure ...

replace the A/C Compressor. How do I get the tension out of the Serpentine belt? on the idler there is either a bolt or a square hole. if it has the square hole it is for a 3/8 drive breaker bar if it

serpentine belt and now my car wont shift into gears... why is that? why would my transmission slip like that after i just bought a brand new belt The replacement of the serpentine belt won't have

...serpentine belt for 2003 Monte Carlo 3.8L the belt is self adjusted by a spring loaded automatic belt tensioner, if the belt is noisy or seems loose either the belt size is wrong (if it was replaced ...