I replaced the egr valve and the check engine light is still on so what do I do the code still says p0401 When you replaced the EGR valve did you check the EGR passage to make sure it wasn't clogged. ...
Question about Chevrolet Monte Carlo
Does a clogged EGR valve or faulty EGR cause the engine to idle erractically at stops and die if the gas is not pressed? 03 monte ls 3.4 L 110k miles. Ive read in the forums that a fault egr will ...
...is power loss the tranny shifts fine (service eng soon) had it scanned trouble code (p0404)fault in egr position sensor (probable causes) 1failed egr position sensor 2open or short cirtuit condition ...
I recently change the egr valve on my car due to engine light, but I had the light reset and the engine light came back on. I put it back on the machine and got a reading of po401 which is egr flow ...
egr vale n codepo300 random/multible cylinder missfire. could be coils, plug wires, plugs, p0300 is a multiple cylinder misfire code,it might be time for a tune up,how many miles are on your car? what
...light came after I had changed the wires and plugs about a month ago, the code came back as p0401 egr insufficient air flow,I bought a new egr, gaskets, I had erased the code several times,only to ...
Question about Chevrolet Monte Carlo
I recently change the egr valve on my car due to P0401 I recently change the egr valve on my car due to engine light but I had the light reset and the engine light came back on. I put it back on the ...
02 monte carlo, radom misfires, EGR circuit failure will not pass smog:radom misfires, EGR circuit failure changed EGR valve, and spark plug Does it misfire under load like when you press on the gas ...
Question about Chevrolet Monte Carlo
I have a2001 Monte Carlo it keeps throwing apo401code I have changed the egr vale and still. Have the code It sounds like you might have plugged EGR passages. When the EGR valve opens, it should allow
...a 3.4 have a lot of miss fire i did a tune up and it wont ride pass 60 on the dash i change the egr and fuel&air fiter and it wont catch speed it keep jumping when i try to catch speed and
380 questions posted
Usually answered in minutes!
605 Questions
554 Questions
577 Questions
528 Questions
428 Questions