1996 Chevrolet Lumina Mini "shaking hwy" Questions

...shaking when reaching 100 mph. Do we need a new rim to that wheel? What could it be.  jack it up and spin the wheel ,could be rim or it could be a deformed /damaged tyre I think it could be a ...

car shakes when coming off the hwy my car shakes when i am coming off the hwy the stearing wheel shakes and it seems like the front end does as well. the car also makes a noise randomly (no matter ...

has a shake in the front end shakes then stops then shakes again only at hwy speeds around 70 mph front end shakes at 70mph first have tire balance checked, at same time they will inspect your inner ...

...hwy. the front end of my truck starts to shake violently , until i start to let off the brakes , the side to side shaking transitions thru the steering wheel, COULD IT BE THE ROTORS OR SOMETHING ELSE ...

...hwy speed shaking is quicker, could this be the drive shaft? Have you a had a 4 wheel alignment done?If all four wheels aren't set to a comman center line it cause it to shake,a warped brake rotor ...

...shaking stops and I can continue at hwy speeds. I have an 2007 F 350 6.0 crewman FX4 i take it you have checked all the wheel nuts are tight and the wheels are balanced the next thing i would be ...

My car slightly shakes while I drive at either lower or higher speeds periodically. I just got my car repaired (e.g., replaced the crankcase ventilation system - hoses, seals, valves, etc and the 2 ...

f350 4x4 frontend shake While driving at around 55 mph and I hit a seam or rough patch the front end shakes real bad. I have to slow down and it stops then I can continue at hwy speeds. I have a 2007 ...

...hwy with the steering wheel shaking, as soon as I come to a slight curve in the hwy at 75mph the shake stops. As soon as I come out of the curve the shakes start again. No problem from 0-70 or 80 to ...

when i reach 45 50mph trucks shakes hard if i accelerate or slow down it stops i cant cruise at normal hwy speeds smoothly service engine light is on You need to find out the code.That could be a lot ...