...obd2 and the regal. Any tips to get it to work with this pcm. Check your fuse panel for a fuse panel. You are probably not getting power to your diagnostics port on your vehicle. I do not remember ...
...OBD2 Code Reader is as simple as locating the DLC connector. The DLC connector is usually found under the driver side (left side) of the dash. The cable attaches only one. Reading the LCD Display ...
obd2 port not working 1999 toyota sienna check engine light on, starts flashing, engine starts misfiring, then stops misfiring, runs good, engine check light goes off, obd2 port not working, fuses ...
no power on obd2 port on 1997 skylark no power on obd2 port, do not find any blown fuses If the computer is working correctly, the problem is usually the cig lighter fuse.
Question about Cars & Trucks
...OBD2 port pin 16 ,is the power pins 2010 Ford C. vic,no engine size told 4.6L? the scan tool must be 2008 or newer for CAN_BUS to work and scan. no 1996 tool ever did that. see? use a voltmeter to ...
Question about Plymouth Cars & Trucks
...OBD2 port. It was 1996 when OBD2 was made a legal requirement so your vehicle should be OBD2 compatible. If you have access to another scanner try that one. This is to check if it is the tool or the ...
port 95 rodeo my guess, you are in uSA with 1995 rodeo. with unstated engine and wont to use a 1996 scan tool on a 1995 car usa OBD2 will not work on your 95 the 95 uses custom tools, read $$$$$$$$$$$
...OBD2 port is near the knees, 16pins the spec, call out 1meter from steering shaft center. USA spec. OBD2 is a USA spec. so...... where are you...... see here the car and all the variants. see why we ...
OBD2 PORT DOESNT WORK SCAN TOOL DOESN'T WORK WITH MY OBD2 PORT Try another scan tool on this vehicle to confirm that it is a problem with the port. Then have a technician comfirm that the computer isn
1,997 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,438 Questions
1,339 Questions
1,200 Questions